SEAWARD Electronic Test 'n' Tag, Инструкция по эксплуатации

Страница: 21 / 24

8. Trouble Shooting
logo together with a label title (if required) will then be transferred into
the tester.
Note
The Logo stored in the tester can be protected by a Password if this
has been evoked in the tester (see the tester Instruction Manual). To
maintain security; had a password been set in the tester, on starting
the transfer the Tester Logo Transfer program will request this
password before proceeding.
8. Trouble Shooting
Printer Power on Light Flashing Red
Check to see if the Supply Cartridge is installed properly. If it appears
to be installed correctly, try another Supply Cartridge.
Note
Only Industrial polyester 1” Black on White (Seaward Part No.
308A912, Kroy 2438616) or Black on Yellow (Seaward Part No.
308A914, Kroy 2438643) Supply Cartridges for the Kroy K3000PC
Printer are acceptable with the Test ‘N’ Tag system
Printer Error: No Printer Connected
The following message is displayed:
--------------WARNING---------------
PRINTER ERROR: NO PRINTER CONNECTED
PRESS THE START KEY TO TRY AGAIN, OR
PRESS THE ABORT KEY TO ABANDON THE
PRINTOUT.
If:
•
Wrong Interface cable connected
•
Faulty Interface cable
19