SEAWARD Electronic Test 'n' Tag, Инструкция по эксплуатации

Страница: 5 / 24

1. Introduction
1. Introduction
Test ‘N’ Tag is the new label printing system exclusive to Seaward.
This will enable users of Seaward Supernova / Europa Pat testers to
print thermal transfer labels direct from the tester to the Test ‘N’ Tag
portable printer.
Note
The Test ‘N’ Tag system can only be used with the Seaward
Supernova / Europa family of PAT testers.
The industrial vinyl labels created by the Tag ‘N’ Tag printer are scuff
proof, water proof, tamper proof and unlike direct thermal labels, the
print will not fade in sunlight.
Two types of label can be printed; a panel label – to attach direct to
the appliance panel, a cable wrap label – to wrap around the power
cord.
2. Installing the Supply Cartridge
1. Lift the unit’s dust cover.
2. Make sure the locking spindle is in the counter-clockwise
(unlocked) position.
3. On the bottom of the cartridge, turn the ribbon advance one
full turn counter clockwise (follow arrows on cartridge) or until
any slack in the ribbon is removed.
THIS IS VERY
IMPORTANT.
4. Load the supply into the printer making sure the cartridge is
properly seated.
5. Turn the locking spindle one-quarter turn clockwise to lock
the cartridge into place.
3