SEAWARD Electronic Test 'n' Tag, Инструкция по эксплуатации

Страница: 11 / 24

5. Printing Labels
Labels can be printed either at the end of test or at any other time
from test results stored in the memory.
Note
When printing labels from a newly installed Supply Cartridge the first
label to be printed will not have a logo should a logo have been
added to the label (see section 7 Adding a Logo to the Label).
With the Printer powered on (Green Light illuminated) through its AC
Adaptor, connect the Printer Lead RJ12 connector into the Printer
and the serial connector into the serial port of the tester
Re –Test Period
As the labels require a Next Test due, re-test period will now need to
be defined at the start of the test. On selecting NEW TEST or
entering CREATE APPLIANCE in MANUAL MODE the following
screen is now displayed:
-------ENTER APPLIANCE DETAILS--------
APPLIANCE:
SITE:
LOACTION:
RE-TEST PERIOD:
OK
SITE 0
LOC. 0
12 MONTHS
Use the cursor keys to select RE-TEST PERIOD and then press the
ENTER key to choose a re-test period.
9