Seat Ateca 2020, Руководство пользователя

Страница: 125 / 376

Lights
lights also work when the ignition is switch-
ed off.
● If a trailer turn signal malfunctions, the
control lamp will stop flashing (trailer turn
signals) and the vehicle turn signal will
flash at double speed.
●
The main beam headlights can only be
switched on if the dipped beam headlights
are already on.
●
In cold or damp weather conditions, the
headlights, tail lights and turn signals may
mist up inside temporarily. This is normal
and in no way effects the useful life of the
vehicle lighting system.
● The parking light does not activate auto-
matically if the left- or right-hand turn sig-
nal is left on and the ignition is disconnec-
ted.
Main beam assist (Light Assist)*
The main beam assist acts within the limits of
the system and depending on environmental
and traffic conditions. Once switched on, the
system is activated as of a speed of about 60
km/h (37 mph) and is deactivated below
about 30 km/h (18 mph)
›››
.
When the system is activated and the cam-
era detects other vehicles that may be daz-
zled, the main beam is automatically switch-
ed off. Otherwise, the main beam is automati-
cally switched on.
The main beam assist generally detects illu-
minated areas and deactivates the main
beam when passing through a town, for ex-
ample.
Switching the main beam assist on

●
Turn on the ignition and turn the light switch
to the position

.
●
From the base position, press the turn signal
and main beam headlights lever forwards
›››
Fig. 109
3
When the lamp

is displayed
on the instrument panel display, the main
beam assist is switched on.
Switching the main beam assist off

●
Turn the light switch to a position other than

›››
page 120 .
●
OR: while the main beam is on, pull the turn
signal light and main beam headlights lever
forwards
›››
Fig. 109
4
.
●
OR: push the turn signal and main beam
headlight lever forwards to manually turn on
the main beam. The main beam assist will
then be deactivated.
System limitations
In the following cases, the main beam head-
light must be switched off manually because
the main beam assist will not disconnect it on
time or disconnect it at all:
● On roads with insufficient lighting with very
reflective signs
●
If road users are insufficiently lit up, e.g. pe-
destrians or cyclists.
●
On closed curves, when the traffic in the
opposite direction is partially hidden, on pro-
nounced slopes or inclinations.
● On roads with traffic in the opposite direc-
tion and with a central reservation barrier
where the driver can see over it e.g. lorry driv-
ers.
●
In the event of fog, snow or heavy rain
●
In the event of dust or sand storms
●
If the windscreen is damaged in the cam-
era's field of vision.
●
If the camera's field of vision is misted up,
dirty or covered by a sticker, snow or ice.
●
If the camera is damaged or if the power
supply has been cut off.
WARNING
The convenience features of the main
beam assist should not encourage the tak-
ing of risks. The system is not a replace-
ment for driver concentration.
● You are always in control of the main
beam and adapting it to the light, visibility
and traffic conditions.
●
It is possible that the main beam head-
light control does not recognise all driving
»
123