Seat Ateca 2018, Руководство пользователя

Страница: 276 / 412

Driving
After detecting that the vehicle is stationary
and the brake pedal has been released, the
Auto Hold function holds the vehicle. The driv-
er can lift their foot off the brake pedal.
When the driver touches the accelerator
pedal or accelerates slightly to continue driv-
ing, the Auto Hold function releases the brake.
The vehicle moves according to the slope of
the road.
If the vehicle is stationary and one of the con-
ditions required by the Auto Hold function is
impaired, it disconnects itself and the button's
control light goes out
›››
Fig. 249 . The elec-
tronic parking brake connects automatically,
if necessary, to park the vehicle safely
›››
.
Conditions for keeping the vehicle station-
ary with the Auto Hold function
●
The driver door must be closed.
●
The driver's seat belt must be fastened.
●
The engine is running.
Switching the Auto Hold function on and
off
Press the button

›››
. The control lamp on
the button goes out when the Auto Hold func-
tion is switched off.
Automatically engaging and disengaging
the Auto Hold function
If the Auto Hold function was switched on with
the

button before disengaging the ignition,
the function will remain on after the ignition is
re-engaged.
If the Auto Hold function was not switched on,
it will automatically remain off next time the
ignition is engaged.
The Auto Hold function is automatically
switched on if the following conditions are
met:
All conditions must be met at the same
time
›››
:
Manual gearbox Automatic gear-
box
1. The vehicle is kept stationary with the brake
pedal on a flat surface or on a slope.
2. The engine rotates “correctly”.
Upon pressing the
clutch and acceler-
ating at the same
time, the brake re-
leases gradually.
Upon accelerating,
the brake releases
gradually.
The Auto Hold function is automatically
turned off if the following conditions are
met:
Manual gearbox
Automatic gear-
box
1.
If any of the conditions mentioned on
›››
page 274, Conditions for keeping the ve-
hicle stationary with the Auto Hold function
are no longer met.
2.
If the engine is running irregularly or an anom-
aly is detected.
3.
If the engine is turned
off or stalls.
If the engine is switch-
ed off.
4.
The clutch and the
accelerator are
pressed at the same
time.
If the accelerator is
pressed.
5.
If any of the tyres has
only minimal contact
with the ground, e.g.
in the case of axle ar-
ticulation.
WARNING
The smart technology incorporated into
the Auto Hold function cannot defy the
laws of physics; it only works within the lim-
its of the system. The greater convenience
provided by the Auto Hold function should
never tempt you to take any risk that may
compromise safety.
274