Seat Ateca 2018, Руководство пользователя

Страница: 275 / 412

Driver assistance systems
speed without slowing the engine below its
idling speed.
After starting the descent of a slope below
30 km/h (18 mph), speed is limited to a mini-
mum of 2 km/h (1 mph) and a maximum of
30 km/h (18 mph). When appropriate, the
driver may increase or decrease the speed
within the limit by pressing the accelerator or
the brake. At this point the function is interrup-
ted and, if necessary, it is then reactivated.
Even so, it is imperative that the surface guar-
antees sufficient adhesion. For this reason,
the Hill Descent Control
will not fulfil its func-
tion when, for example, descending a slope
with a frozen or slippery surface.
Hill Descent Control is available when the
dash panel display shows the message

.
Hill Descent Control automatically intervenes
if the following conditions are met:
●
The vehicle engine is running.
●
The Offroad driving profile has been selec-
ted
›››
page 304 . Driving at a speed below 30
km/h (18 mph) (the message

is shown on
the dash panel display).
●
The slope of the descent is at least 10%
when driving forward and 9% when driving in
reverse.
●
The brake and the accelerator are not
pressed.
Hill Descent Control is deactivated on press-
ing the brake and the accelerator or if the
slope is below 5%. The function may be dis-
connected manually in the Easy Connect
system by pressing the

button >
HDC
function button
›››
 Fig. 50 .
WARNING
Always be ready to brake. Otherwise, an
accident could occur and cause injury.
●
Hill Descent Control is only an auxiliary
system that in some situations may not suf-
ficiently brake the vehicle when going
down a slope.
●
The speed of the vehicle may increase
despite the intervention of Hill Descent
Control.
Auto Hold Function
Description and operation
Fig. 249
In the lower part of the centre con-
sole: Auto Hold function button.
The control light of the

›››
Fig. 249 button
remains on when the Auto Hold function is
connected.
Once connected, the Auto Hold function as-
sists the driver in keeping the vehicle station-
ary at repeated intervals or for a certain peri-
od of time with the engine running, for exam-
ple, when going up a slope, when stopped at
traffic lights or in heavy traffic with intermit-
tent stops.
When connected, the Auto Hold function au-
tomatically prevents the vehicle from rolling
when stationary without pressing the brake
pedal.
»
273