Seat Ateca 2018, Руководство пользователя

Страница: 177 / 412

Transport and practical equipment
Fig. 181 Variable boot floor: tilted position.
Variable floor in high position
●
To move from the low position to the high
position, lift the floor using the handle
›››
Fig. 180
1
, and pull it back until the front
of the floor has fully passed the supports
2
.
●
Move the floor forward over the supports as
far as the rear seat backrest and then lower
the floor with the handle
1
.
Variable floor in low position
●
To move from the high position to the low
position, lift the floor using the handle
›››
Fig. 180
1
, and pull it back until the front
of the floor has fully passed the supports
2
.
●
Now let the front part fall to the floor and
slide the floor forwards as far as the rear seat
backrest; lower the floor at the same time
with the handle
1
.
Variable floor in the tilted position
When the variable floor is tilted you can ac-
cess the spare wheel/anti-puncture kit area.
●
Lift the variable floor in the high position us-
ing handle
›››
Fig. 180
1
, pull it up and push
it towards the backrest of the rear seats until
the floor folds along the hinge line and the
movable part of the floor is resting on itself.
●
Rest the floor on its housings
›››
Fig. 181 (ar-
rows).
Variable floor with folded seats
●
To move from the high position to the low
position, lift the floor using the handle
›››
Fig. 180
1
and pull it back a little.
●
Push the variable floor towards the folded
rear seats with the handle
1
using some
downward pressure so that the moving part
of the floor is flush with the backs of the rear
seats.
WARNING
During a sudden driving or braking ma-
noeuvre, or in the event of an accident, ob-
jects could be flung though the interior and
cause serious or fatal injuries.
● Always secure objects, even when the
luggage compartment floor is properly lif-
ted.
●
Only objects that do not protrude more
than 2/3 the height of the floor may be car-
ried between the rear seat and the raised
luggage compartment floor.
● Only objects that do not weigh than ap-
proximately 7.5 kg may be carried between
the rear seat and the raised luggage com-
partment floor.
CAUTION
●
The maximum weight that can be loaded
on the luggage compartment variable floor
in the top position is 150 kg.
●
Do not let the luggage compartment
floor fall when closing it. Always carefully
guide it downwards in a controlled manner.
Otherwise, the lining and the floor of the
luggage compartment could be damaged.
Note
SEAT recommends the use of straps to se-
cure objects to retaining rings.
Roof carrier*
Introduction
The vehicle roof has been designed to opti-
mise aerodynamics. For this reason, cross
bars or conventional roof carrier systems
cannot be secured to the roof water drains.
»
175