Seat 2014 LEON CUP RACER, Руководство пользователя

Страница: 222 / 284

Advice
the wheel condition and hub mounting surfa-
ces. These surfaces must be clean before fit-
ting the wheel.
CAUTION
When removing/fitting the wheel, the rim
may hit and damage the brake disc. For this
reason, please take care and get a second
person to assist you.
Tyres with compulsory direction of
rotation
A directional tread pattern can be identified
by arrows on the sidewall that point in the di-
rection of rotation. Always observe the direc-
tion of rotation indicated when mounting the
wheel. This is important so that these tyres
can give maximum grip and avoid excessive
noise, tread wear and aquaplaning.
If, exceptionally, it is necessary to mount the
spare wheel* in the opposite direction of ro-
tation, please drive carefully, as in this case
the tyre does not have optimum conditions of
use. This is particularly important when driv-
ing on wet roads.
To benefit from the advantages of tyres with
this type of tread pattern, the defective tyre
should be replaced as soon as possible so
that all tyres again rotate in the correct direc-
tion.
After changing a wheel
– On alloy wheels: replace the wheel bolt
caps.
–
On plate wheels: replace the wheel hubcap
›››
page 217 .
–
Put the tools and jack back in the luggage
compartment.
–
If the replaced wheel does not fit in the
spare wheel housing, store it safely in the
luggage compartment
›››
page 114 .
–
Check the tyre pressure of the newly moun-
ted tyre as soon as possible.
–
In vehicles fitted with a tyre pressure indi-
cator, adjust the pressure and store the
reading in the radio/ Easy Connect system*
›››
page 212 .
– The wheel bolts should be tightened to 120
Nm. Check the torque as soon as possible
with a torque wrench. Meanwhile, drive
carefully.
–
Have the flat tyre replaced as quickly as
possible.
Tyre repair
Tools, anti-puncture kit*
The tools and anti-puncture kit* are stored
under the floor panel in the luggage compart-
ment.
To access the vehicle tools:
–
Lift up the floor surface by the plastic han-
dle until it is fastened to the tabs on both
sides.
Depending on the vehicle equipment, the
tyre repair kit* is located under the floor pan-
el in the luggage compartment.
The tool kit includes:
●
Jack*
● Wire hook for pulling off the wheel cov-
er* /wheel bolt cap clip.
● Box spanner for wheel bolts*
● Towline anchorage
●
Adapter for the anti-theft wheel bolts*
Some of the items listed are only provided in
certain model versions, or are optional ex-
tras.
Note
The jack does not generally require any main-
tenance. If required, it should be greased us-
ing universal type grease.
220