SeaLevel SeaI/O Series Скачать руководство пользователя страница 115 | Manualshive

Страница: 115 / 115

background image

©Sealevel Systems, Inc.
SL9049 - 06/2011

SeaI/O Manual

115

Sealevel's commitment to providing the best I/O solutions is reflected in the Lifetime Warranty that
is standard on all Sealevel manufactured I/O products. Relio™ industrial computers are warranted
for a period of two years and the R9 family is warranted for a five year period from date of
purchase. We are able to offer this warranty due to our control of manufacturing quality and the
historically high reliability of our products in the field. Sealevel products are designed and
manufactured at its Liberty, South Carolina facility, allowing direct control over product
development, production, burn-in and testing. Sealevel achieved ISO-9001:2000 certification in
2002.

Sealevel Systems, Inc. (hereafter "Sealevel") warrants that the Product shall conform to and perform
in accordance with published technical specifications and shall be free of defects in materials and
workmanship for the warranty period. In the event of failure, Sealevel will repair or replace the
product at Sealevel's sole discretion. Failures resulting from misapplication or misuse of the
Product, failure to adhere to any specifications or instructions, or failure resulting from neglect,
abuse, accidents, or acts of nature are not covered under this warranty.

Warranty service may be obtained by delivering the Product to Sealevel and providing proof of
purchase. Customer agrees to insure the Product or assume the risk of loss or damage in transit, to
prepay shipping charges to Sealevel, and to use the original shipping container or equivalent.
Warranty is valid only for original purchaser and is not transferable.

This warranty applies to Sealevel manufactured Product. Product purchased through Sealevel but
manufactured by a third party will retain the original manufacturer's warranty.

Products returned due to damage or misuse and Products retested with no problem found are
subject to repair/retest charges. A purchase order or credit card number and authorization must be
provided in order to obtain an RMA (Return Merchandise Authorization) number prior to returning
Product.

If you need to return a product for warranty or non-warranty repair, you must first obtain an RMA
number. Please contact Sealevel Systems, Inc. Technical Support for assistance:

Available

Monday – Friday, 8:00AM to 5:00PM EST

Phone

864-843-4343

Email

[email protected]

Sealevel Systems, Incorporated acknowledges that all trademarks referenced in this manual are the
service mark, trademark, or registered trademark of the respective company.

«
...
113
114
115

Содержание SeaI/O Series




















































































































Отзывы:

Нет отзывов

Похожие инструкции для SeaI/O Series

Бренд: ZEHUS Страницы: 28

Бренд: Valfonta Страницы: 12

Бренд: Danfoss Страницы: 7

Бренд: V2 ELETTRONICA Страницы: 72

Бренд: Parker Страницы: 21

Бренд: Parker Страницы: 26

Бренд: Parallax Страницы: 3

Бренд: YASKAWA Страницы: 121

Бренд: YASKAWA Страницы: 17

Бренд: YASKAWA Страницы: 58

Бренд: YASKAWA Страницы: 30

Бренд: Tylo Страницы: 51

GA Industries 930-DT

Бренд: Vag Страницы: 4

Бренд: Samson Страницы: 102

Бренд: Vertiv Страницы: 2

Бренд: Quantum Страницы: 20

Бренд: Grundfos Страницы: 20

Бренд: Leggett & Platt Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды