SeaLevel SeaI/O Series Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 115

background image

©Sealevel Systems, Inc.
SL9049 - 06/2011

SeaI/O Manual

37

The SeaMAX Suite is a collection of configuration/diagnostic utilities and software libraries that
enable rapid application development. The SeaMAX API, included in the SeaMAX Suite, provides a
common API for Sealevel SeaI/O and SeaDAC data acquisition modules. SeaMAX is designed to
simplify application development by requiring little knowledge of the underlying communication
protocols of these devices and replacing low-level programming. SeaMAX is available in an
unmanaged library and a wrapper library that provides an interface to the API from managed code.

The following libraries and utilities are included in the SeaMAX Suite and are covered in this
chapter:



MaxSSD Configuration & Diagnostics utility



Ethernet Config utility



SeaMAX API



SeaMAX .NET API

The SeaMAX API documentation, installed with SeaMAX, explains the usage and API references,
including function calls and enumerations. Sealevel digital and analog I/O modules supported by
SeaMAX software are designed to work with third party applications via the SeaMAX API. To help
simplify application development, the complete API documentation and code samples are

automatically installed with the SeaMAX Suite and can be found in Windows by clicking Start



All

Programs



Sealevel SeaMAX



Documentation. For convenience, Sealevel offers a PDF version of

the

on our website. Example code is also included for several popular languages

and compilers.

Please contact Sealevel technical support with any questions regarding SeaMAX documentation:
Phone: (864) 843-4343
Email:

[email protected]

Sealevel SeaI/O modules are designed to integrate seamlessly into existing Modbus networks. The
supported command set will vary depending on the SeaI/O model number used. Specialized
diagnostic commands and other RTU specific codes are not supported. An overview of the Modbus
specification for both RTU and TCP connections is covered in detail in the interactive
documentation located on the Sealevel website at

http://www.sealevel.com/software/SeaMAX/

The official Modbus specification can be found at

http://www.modbus.org

«
...
35
36
37
38
39
...
»

Содержание SeaI/O Series




















































































































Отзывы:

Нет отзывов

Похожие инструкции для SeaI/O Series

Бренд: Bartlett Страницы: 30

Бренд: Panasonic Страницы: 72

Бренд: Panasonic Страницы: 45

Бренд: Panasonic Страницы: 24

Бренд: Warren Controls Страницы: 16

Бренд: Ebyte Страницы: 35

Бренд: Valcom Страницы: 3

Бренд: Valcom Страницы: 3

Бренд: Valcom Страницы: 2

Бренд: LLURIA Страницы: 2

1020 CAN-RS232-RS422 MFL

Бренд: PENKO Страницы: 29

Бренд: MX Страницы: 12

Бренд: Inkel Страницы: 12

Бренд: Parallel Audio Страницы: 4

Бренд: Bentel Страницы: 88

Бренд: Zenith Страницы: 20

Бренд: TCS Страницы: 8

Бренд: Veichi Electric Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды