SEAL AquaSEAL SW-2600, Руководство по эксплуатации для владельца

Страница: 42 / 44

31
Section 7 - Glossary
Meyer Bar: Applicator Bar:
Part of the assembly that transfers or
applies the sealant or laminate to the
base substrate, a wire wrapped bar.
(see Draw Down Assembly). The assembly system that applies
sealant from the supply tanks on the
substrate - part of the Draw Down
Assembly (see Distribution Valve).
Photo Eyes: Brake Tension Controller:
The light sensitive electrical switching
system that will stop certain operations if
blocked. The adjustment system that puts tension
or pull on the substrate as it comes off
the Unwind Roller.
Substrate: Distribution Valves:
The base material or media that the
image is printed on or the material to be
coated with sealant. A system of valves that apply the
sealant to the substrate evenly - part of
the Applicator Bar.
Sealant: Draw-Down Applicator:
A liquid that is permanently applied or
coated onto the base substrate or image
(see Coating). The assembly unit that applies and
smoothes the sealant coating to the
substrate.
Take-Up Roller: Dryer Panel:
The roller that captures and roles up the
processed substrate as it exits the
coater. The assembly that dries and cures the
sealant as the substrate passes
underneath.
Unwind Roller:
Earth Linkage (GFCI):
The roller that holds and feeds the un-
processed substrate as it enters the
coater. This is a power source with a grounding
system that is constructed physically to
the ground.
Webbing: Coating:
Loading or threading the machine with
base substrate or image, prior to the
laminating process (see Laminating). The thin layer of clear material to be
permanently affixed onto an image (see
Sealant).
Or: the process of bonding a base
substrate with a thin layer of clear
material.
Web Idler:
A roller that positions the substrate prior
to it’s proceeding into the laminating
process or webbing loop.
32