SEAL AquaSEAL SW-2600, Руководство по эксплуатации для владельца

Страница: 27 / 44

17
4.2 Installation,
Set-up and Training Requirements
ƒ Seal Graphics offers professional set-up, installation and training. It is
recommended that a certified engineer or electrician assist with
installation. Contact Customer Service to schedule.
ƒ The intended operator should be present during installation and training.
ƒ A licensed electrician must wire machine to the main electrical supply.
ƒ Power outlet close to the coater (within 5m).
ƒ Power cable (type HO7RN-F).
ƒ The electricity supply should have a “GFCI” protection device fitted. If in
doubt, please contact Technical Services or consult a local electrician
(see Section 3).
ƒ Compressed air supply, 100psi @ 3CFM (If No, fax customer services
on 800 257-7325 to order).
ƒ Adequate building sub-structure to support the weight of the machine,
supplies and operators.
ƒ Adequate space and ventilation.
ƒ
Clean water source and drain (as close as possible to the intended
working area).
ƒ
Check that all safety issues have been addressed (see Section 1).
ƒ
The coater must be in final working position and all above installation
requirements met.
ƒ Sufficient substrate, for coating during installation & training (approx.
150ft or 50m).
ƒ Stock of AquaSEAL™ liquid laminate (If not, fax customer services on 1-
800-257-7325 to order).