Seakeeper 5500 GYRO, Руководство по установке

Страница: 30 / 66

INSTALLATION
MANUAL
Product: Document #: Rev: Page:
MODEL 5500 GYRO 90214 2 6 of 17
Section 2: ELECTRICAL INSTALLATION
iii. The recommended wiring is shown in Figure 7. Refer to Figure 5 for Cable 8 wire
connections.
RELAY,
CUSTOMER
SUPPLIED
COIL: 230 VAC
CONTACTS: FOR SEAWATER
PUMP CURRENT
RELAY SELECTION
PE
SEAWATER
PUMP,
CUSTOMER
SUPPLIED
+V
-V
CABLE 8
3x16AWG or 3x1.5m m
2
,
SEAKEEPER SUPPLIED,
3m LENGTH
SEAWATER PUMP
POWER,
208-230 VAC,
5A, 1Ø, 50/60 Hz
COMPACT MOTOR DRIVE
BOX
SEAWATER
PUMP
POWER
SEAWATER PUMP
AC DISCONNECT
SWITCH
+V
-V
EARTH
GRN
CIRCUIT
BREAKER, 5 AMP
CUSTOMER
SUPPLIED
CIRCUIT BREAKER
TB 5
TB 6
TB 4
SEAWATER
PUMP POWER
CABLE,
CUSTOMER
SUPPLIED
FIGURE 7 – RECOMMENDED WIRING FOR SEAWATER PUMPS NOT 230 VAC
d. If CABLE 8 is not used, bundle cable and secure to forward brace or other area nearby
which will not come in contact with moving parts during gyro operation. Do NOT cut
CABLE 8 as it contains live voltage when gyro is in operation. Gyro ships with CABLE 8
permanently sealed at end of cable with protective cap in the event it is not used. Do NOT
remove CABLE 8 from Compact Motor Drive Box as moisture will be free to enter box
through open cable gland and corrode internal electronic components.
Cable 8 contains live voltage when gyro is in operation. Do NOT cut
Cable 8. Do not remove Cable 8 from Compact Motor Drive Box.