XFp Extracellular Flux Analyzer User Manual
_____________________________________________________________________________________________________________________
3a. Wired Setup
1.
From the
Home
screen select the
Settings
button.
2.
Select the
Go to Setup
button. The
Wired Network Connection Settings
screen will
appear.
There are two options to use, depending on the settings required by the facility IT
department:
Option 1: Automatic IP Address Assignment
1.
Ensure the check box at the top of the
Wired Network Connection Settings
screen
is selected and an IP address is populated into the address field.
Option 2: Manual IP Address Assignment
1.
Remove the green check from the Obtain IP Address Automatically check box.
2.
Manually enter the information provided by the local IT department for the
instrument.
3.
After setting the IP options, click the
Save
button.
4.
Power the XFp Analyzer
OFF
5.
Power the XFp Analyzer
ON
6.
Once the temperature in the upper right corner of the user interface displays
37°C, click
Settings
, and then select
Go To Setup.
7.
Press the
Ping
button to ensure there is a working connection. A “Pass” message
should appear if there is an active connection and correct settings.
a.
If the connection fails, re-confirm the IP address setting with the IT
department and confirm the information in the hardware setup steps.
8.
Use the left and right arrows at the bottom of the user interface to exit the setting
options.
21
