DiskStor Portable USB Hard Drive
Online Reference Manual
9
d) The next wizard screen lists the main driver file
(FCCABLE.INF). Click on the Next button. At this
point the driver files are copied to your internal hard
drive.
e) After the driver files have been copied, you will see
the message, “Windows has finished installing the
software that your new hardware device requires.”
Click on the Finish button.
f)
As the wizard finishes, “New Hardware Found”
messages may appear temporarily as the system
identifies your new USB hard drive.
After you have installed the appropriate USB driver, your
DiskStor USB hard drive is ready to use! If you have
difficulties with the installation, try the troubleshooting
tips on page 14.
dstorusb.p65
04/20/2001, 1:41 PM
9
