FEATURES AND SPECIFICATIONS
The
MARK TANK E 270
and
MARK TANK E 390
are two high quality hydraulic operators for residential and condominium use with
leaf length up to respectively 3 and 5 m.
Available in the following versions:
SC
(with lock only in closing)
SB
(without lock)
SA
(with lock only in opening)
AC
(with lock in opening and closing)
The lock is guarantied on leaves with lengths under 1,80 m with the MarkTank E 270 operator while for lengths up to 2.20 m use the
Mark Tank E 390. An electric lock should be used for leaves (in all versions) exceeding those lengths.
The Mark Tank E is supplied with by-pass valves for the power regulation in both opening and closing. Electronic adjustable slow
down in opening and closing with electronic control board. For the European laws and directives actually in force it is strongly
recommended to use the Safety Gate (device for the reading of the gate position), for reverse in case of obstacle.
CICLES/HOUR
OPERATORS
MARK T
ANK E 270
MARK T
ANK E 390
3 m
5 m
40
50
MARK
T
ANK E 270
MARK
T
ANK E 390
TECHNICAL FEATURES
Rod speed
Operating temperatures
Thermal protection
M
P
Power supply
Power
Absorbed current
Stroke
Cycles hour (at a temp. of 20°C)
Max working pressure
ax Thrust
Capacitor
Weight
rotection class
Max leaf lenght
Opening degree of the leaf
Dimensions (
mm
)
Max. leaf length
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
Fig. 1
0
9
7
0
/ 390
270
90
0
9
/ 123
10
/ 129
0
50
Fig. 2
1
3
4
2
1
. Shaft cover
2
. release
3
. Front bracket
4
. Rear bracket
5
. Cylinder
6.
By-pass valves
7.
Electric motor
8.
Hydraulic pump
9.
Exit electric cables
MARK TANK E 270 MARK TANK E 390
230 V (±5%) 50/60 Hz
180 W
220 W
1 A
270 mm
1,2 cm/s
40
50
30 bar
40 bar
-40°C +60°C
130°C
250 daN
640da N
12,5µF
10,5 kg
12 kg
Ip55
3 m
5 m
90° - 110°
Note
: The frequency of use is valid only for the first hour at 20°C room
temperature.
2
MARK TANK E
English
English
USI
NG GRAPHIC
O
PERA
T
O
R MARK T
ANK E
5
6
7
8
9
REV 00 - 07/2013
67410019
