Fig.23
RISK EXAMINATION
The points pointed by arrows
are potentially dangerous. The installer must take a thorough risk examination
to prevent crushing, conveying, cutting, grappling,
trapping so as to guarantee a safe installation for people,
things and animals.
(
) As for misunderstandings that may arise
refer to your area distributor or call our help desk. These
instructions are part of the device and must be kept in a
well known place.The installer shall follow the provided
intructions thoroughly.
products must only be used
to automise doors, gates and lwings. Any initiative taken
without
explicit authorization will preserve the
manufacturer from whatsoever responsibility. The
installer shall provide warning notices on not assessable
further risks.
in its relentless aim to improve the
products, is allowed to make whatsoever adjustment
without giving notice. This doesn’t oblige
to up-
grade the past production.
can not be deemed responsible for any damage or accident caused by product
breaking, being damages or accidents due to a failure to comply with the instructions herein. The guarantee will be
void and the manufacturer responsibility will be nullified if
original spare parts are not being used.
Packaging materials such as plastic bags, foam polystyrene, nails etc must be kept out of children’s reach
as dangers may arise.
in fig. 23
Re. Laws in force in the country where installation has
been made.
SEA
SEA
SEA
SEA
SEA
SEA The
electrical
installation shall be carried out by a professional technician who will release documentation as requested by the laws
in force.
I N I T I A L T E S T A N D
S T A R T I N G O F T H E
AUTOMATION
After having completed the necessary
operations for a correct installation of the
Mark Tank E product, as described in this
manual, and after having valuated all
resting risks which could arise in any
installation,
it is necessary to test the
automation to guaranty the maximum
security and, in particular way, to
guaranty that the laws and norms of this
sector are fully respected
. Especially the
test must be executed following the norm
EN 12445
which establishes the methods
of tests for checking the gate automations respecting the limits established by the rule
EN 12453.
SAFETY GATE
For a correct and safe installation it is strongly recommended to install a Safety Gate,
which allows the fulfilment of
the force diagram included in the norm EN 12453
and consequently the test and start of the whole installation.
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
English
English
REV 00 - 07/2013
Fig.24
11
67410019
MARK TANK E
