MARK TANK E
ACCESSORIES
SAFETY GATE
ELECTRIC LOCK
PHOTOCELLS
TRANSMITTER
EXTERNAL
LOOP DETECTOR
KEY SWITCH
FLASHING LAMP
CONTROL UNIT
SUPPORTS
FOR PHOTOCELLS
KIT EXTERNAL LOCK
MARK TANK E
SAFETY PRECAUTIONS:
All electrical work should conform to current regulations. A 16 A 0,030 A differential switch must be incorporated into the
source of the operators main electrical supply and the entire system properly earth bonded. Always run mains carrying
cables in separate ducts to low voltage control cables to prevent mains interference.
INTENDED USE:
The Mark Tank E operator is been designed to be solely used for the automation of swing gates.
SPARE PARTS:
To obtain spare parts contact:
SEA S.p.A. - Zona Ind.le, 64020 S. ATTO Teramo Italia
SAFETY AND ENVIRONMENTAL COMPATIBILITY:
Don’t waste product packing materials and/or circuits.
When being transported this product must be properly packaged and handled with care.
LIMIT OF GUARANTEE
For the guarantee see the sales conditions on the official SEA price list.
MAINTENANCE AND OUT OF SERVICE:
The decommission and maintenance of this unit must only be carried out by specialised and authorised personnel.
NOTE: THE MANUFACTURER CAN NOT BE DEEMED RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED
BY IMPROPER USE OF THIS PRODUCT.
SEA
reserves the right to do changes or variations that may be necessary to its products with no obligation to notice.
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
RADIO RECEIVER
English
English
REV 00 - 07/2013
12
67410019
MARK TANK E
