15
INITIAL TEST AND STARTING OF THE AUTOMATION
After having completed the necessary operations for a correct installation of the product, as described in this manual,
and after having valuated all resting risks which could arise in any installation,
it is necessary to test the automation
to guarantee the maximum security and, in particular way, to guarantee that the Laws and Rules of this sector
are fully respected
. Especially the test must be executed following all the Laws in force
RISK EXAMINATION
The points pointed by arrows are potentially dangerous. The installer must
take a thorough risk examination to prevent crushing, conveying, cutting,
grappling, trapping so as to guarantee a safe installation for people, things
and animals.
(
Re. Laws in force in the country where installation has been
made
)
. As for misunderstandings that may arise refer to your area distributor
or call our help desk. These instructions are part of the operator and must be
kept in a well known place. The installer shall follow the provided instructions
thoroughly.
products must only be used to automatize doors
SEA USA Inc.
and gates. Any initiative taken without
explicit authorization
SEA USA Inc.
will preserve the manufacturer from whatsoever responsibility. The installer shall provide warning notices on not
assessable further risks.
in its relentless aim to improve the products, is allowed to make whatsoever
SEA USA Inc.
adjustment without giving notice. This doesn’t oblige
to up-grade the past production.
can
SEA USA Inc.
SEA USA Inc.
not be deemed responsible for any damage or accident caused by product breaking, being damages or accidents due
to a failure to comply with the instructions herein. The guarantee will be void and the manufacturer responsibility will be
nullified if
original spare parts are not being used.
SEA USA Inc.
The electrical installation shall be carried out by a
professional technician who will release documentation as requested by the Laws in force.
Packaging materials such
as plastic bags, foam polystyrene, nails, etc must be kept out of children’s reach as dangers may arise.
International registered trademark n. 2.777.971
TO THE ATTENTION OF THE TECHNICIAN AND THE END-USER
WARNINGS
: All electrical installation should comply the current regulations. A
16A - 0,030A
differential switch must
be used. The entire system must be properly earth bonded. Separate the main supply cables (operators, power
supply) from command cables (photocells, push-buttons, etc) through pipes or sheats to prevent interferences and
noise
. Always use cable-glands or pipes close to the control unit box to protect the interconnection cables
against pulling efforts
INTENDED USE:
The operator has been designed to be used for the automation of swing gates only
SPARE PARTS:
SEA USA Inc. - Doral - MIAMI - (FL) 33172 -
Send request for spare parts to:
www.sea-usa.com
SAFETY AND ENVIRONMENTAL COMPATIBILITY:
Don’t waste product packing materials and/or circuits
STORAGE:
must be properly packaged, handled with care
Materials
and with appropriate vehicles
MAINTENANCE AND DECOMMISSION
: The decommission and maintenance of products must be carried out by
specialised and authorised personnel only
GUARANTEE LIMITS
: For the guarantee see the sales conditions
THE MANUFACTURER CAN NOT BE DEEMED RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED BY
IMPROPER USE OF THIS PRODUCT
SEA reserves the right to make all the necessary changes and modifications of the products or manuals
without giving prior notice
T
min
-4°F
T
max
+149°F
Humidity
min
5% without condensation
STORAGE TEMPERATURE
Humidity
max
90% without condensation
SAFETY AND PRECAUTIONS