manualshive.com logo in svg

SEA USA USER 2 - 24V, Руководство пользователя

Поделиться
Скачать
SEA USA USER 2 - 24V Скачать руководство пользователя страница 16

Cycle                          Semiaut./manual/automatic/security          

Double/single leaf      Select double or single leaf

Time of pause            [0÷120]s (time of pause in seconds)

Encoder                     on/off (function with encoder, not implemented)

The Jolly programmer allows to keep under control all the parameters of the control unit and it results essential for the initial 
setting of some parameters, which are: pre-flashing, photocell self-testing, photocell in opening, anti-intrusion, torque motore1 
and 2,   deceleration   speed, learning speed, acceleration, deceleration, leaf stroke, number of cycles, pedestrian opening, etc.

Screen 2

Screen 4

Screen 5

Screen 3

Motor                         (Field/Alpha)     (Flipper)      (Beta)

Screen 1

Language: Italian     With b and - it is possible to modify the language 

The arrow shows that the 
parameter is modifiable with the 
b and -

Screen 6

Screen 7

Screen 8

Note

: The alignment appears only if 

photocells are present on the BUS.

Note

: Hydraulic/barrier on 

USERHIDRO

Learning                    on alignment/off (signalling of the execution of 
                                  the learning) 

32

Cicli exec.                  [0÷2  ] (number of executed cycles)    

Mem. free                  [0÷100]%   (percentage of available 
                                  memory for the learning of remote controls)

Indicates the type of motor set

Speed                        [30÷100 ] adjusts the motors’ speed   

Sl. speed                   [30÷100 ] adjusts the slow down speed   
Lear. Speed.              [30÷100 ] adjusts the learning speed   

Photocell Tx1             [OK-NP]  (peripheral reveal  - not present)    

Photocell Tx2             [OK-NP]  (peripheral reveal  - not present)    
Photocell TX3             [OK-NP]  (peripheral reveal  - not present)    

Photocell TX4             [OK-NP]  (peripheral reveal  - not present)    

 Photocell TX5             [OK-NP]  (peripheral reveal  - not present)    

Photocell Rx1             [OK-NP]  (peripheral reveal  - not present)    

Photocell RX2            [OK-NP]  (peripheral reveal  - not present)    

 Photocell Rx3             [OK-NP]  (peripheral reveal  - not present)    

Photocell RX4            [OK-NP]  (peripheral reveal  - not present)    
    

Photocell RX5            [OK-NP]  (peripheral reveal  - not present)    

S h o w s   t h e   w o r k i n g   l o g i c        
adjusted on board of the control 
unit.  

The screens

 4

, 

5

, 

6

, 

7

, 

8 

and 

9

 

show   the type of accessory on the 
BUS.

PROGRAMMER JOLLY PARAMETERS ADJUSTMENT

67410925

16

USER 2 - 24V 

International registered trademark n. 2.777.971

REV 02 - 06/2010

Содержание USER 2 - 24V

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды