Sea Ray 250 Select EX, Руководство пользователя

Страница: 91 / 110

8.1
S
E C T I O N
8 • R
E Q U I R E D
I
N S P E C T I O N
, S
E RV I C E
& M
A I N T E N A N C E
250 Select EX
Electrical
Connections Check for looseness To be done by Sea Ray dealer annually
Routine inspection, service and maintenance of
your boat’s systems is vital to assure your safety,
as well as for prolonging the life of your boat. You
should develop regular routines for inspecting your
boat. The chart below summarizes inspection,
service and maintenance activities. This section
also contains descriptions of some convenient
methods for evaluating the condition of some of
your boat’s systems. The inter val between necessar y ser vice or
maintenance is highly variable, depending on the
environment your boat is in, and on the severity
of operating conditions. For example, corrosion
of parts on boats operated in salt water proceeds
much faster than the corrosion of parts on a boat
operated in fresh water. The intervals listed below
are recommended maximums, and you must reduce
the time between inspections if your observations
indicate the need.
1. S
UMMARY
G
UIDE FOR
I
NSPECTION
, S
ERVICE AND
M
AINTENANCE
*Use in salt water or other severe operating conditions requires shorter maintenance/service intervals
Controls
Steering Check for proper operation To be done by Sea Ray dealer every six months
Power steering oil level Engine Manual •
Gear Shift & Throttle Lubricate. Include all shift Engine Manual • • •
linkage and pivot points
Engine
Alarm Check Engine Manual •
Cooling System Check for leaks Engine Manual •
Connections with engine running
Crankcase Clean Engine Manual • •
ventilating system
Drive belts Check Engine Manual •
Exhaust System Check for leaks Engine Manual • • •
Flame Arrestor Clean Engine Manual • •
Fuel Filter Replace Engine Manual •
Mounts (Fasteners) Tighten Engine Manual • •
Oil and Filter Replace Engine Manual • •
Oil Level Check Engine Manual •
ITEM REQUIRED REFERENCE
BEFORE AFTER EVERY EVERY EVERY 6
MAINTENANCE/SERVICE SOURCE
EVERY FIRST 25* OR 50 50* OR 100 MOS. OR
USE 20 HOURS HOURS HOURS ANNUALLY
INTERVAL
Stern Drive (With Stern Drive Engine Option)
Fluid level Check level Engine Manual •
Fluid Replace Engine Manual •
Battery Check water level Owner’s Manual p. 6.1 • • •
Bilge Area Clean and check Owner’s Manual p. 4.2 •
Bilge Blower Hose connections tight Owner’s Manual p. 4.3 • •
Bilge Pump Float switch operates freely Owner’s Manual p. 4.2 •
Canvas Clean Owner’s Manual p. 9.3 As Needed