Sea Ray 250 Select EX, Руководство пользователя

Страница: 63 / 110

6.3
S
ECTION
6 • E
LECTRICAL
S
YSTEM
250 Select EX
3. F
USES
Fuses are located in two areas on your 250 SLX.
The accessory fuse block is located behind the
access panel at the top of the aft wall in the STBD
Storage area. There are also several fuses on the
bilge component board (Fig. 6.3.2). If you need to
replace a fuse, use only the same amperage as
the original. It is recommended that you carry spare
fuses. Refer to Fig. 6.3.1 for the proper fuse sizes.
If a fuse is replaced with one of lower amperage,
it will not be suffi cient to carry the electrical load
of the equipment it is connected to and will cause
nuisance fuse failure.
Use of higher amperage fuses or breakers is a fi re
hazard.
Use fuses and breakers having the same amperage
rating as the original or as specifi ed.
! WARNING
F
USE
C
ONDITION
(ATO T
YPE
F
USE
)
GOOD FUSE BLOWN FUSE
A
CCESSORY
F
USE
B
LOCK
(F
IG
. 6.3.1)
FUSE NAME FUSE AMPERAGE 12VDC
1. HORN 5
2. IGNITION 15
3. NAV LIGHTS 5
4. BILGE BLOWER 7.5
5. WIPER 5
6. BILGE PUMP 7.5
7. WATER PUMP 10
8. 12V RECEPTACLE 15
9. TRIM TABS 20
10. LIGHTS 15
11. SPOT LIGHT 15
12. HATCH LIFT 15
13. DOCKING LIGHTS 10
14. REFRIGERATOR 10
15. VHF 10
16. CO MONITOR 1
17. CHART 1
18. ACCESSORY BLANK
B
ILGE
B
LOWER
(F
IG
. 6.3.2)
If a fuse or breaker is replaced with one of higher
amperage, it will not provide adequate protection
against an electrical malfunction and will create a
fi re hazard.
BATTERY
CHARGER
(OPT)
STEREO
MEMORY
FWD SUMP
PUMP
BILGE PUMP
WASTE
SYSTEM (OPT)
STEREO AMP
(OPT)