Sea Ray 250 Select EX, Руководство пользователя

Страница: 103 / 110

9.1
S
ECTION
9 • C
ARE
& R
EFINISHING
250 Select EX
2. F
IBERGLASS AND
G
ELCOAT
The fi berglass hull, deck and some interior parts
consist of a molded shell and exterior gelcoat. The
gelcoat is the outer surface, often colored, that pres-
ents the shiny smooth appearance associated with
fi berglass products. This gelcoat surface is painted
or taped in some areas for styling purposes.
Wash the gelcoat and fi berglass regularly with clean,
fresh water. Wax gelcoated surfaces to maintain the
luster. In northern climates, a waxing at the start and
end of the boating season may suffi ce. In southern
climates, an application of wax every three months
will be required for adequate protection.
REFER TO THE “3M ® ONE STEP MAINTENANCE AND
RECONDITIONING PRODUCTS” PAMPHLET IN YOUR
OWNER’S MANUAL PACKET FOR INSTRUCTIONS
AND WARRANTY INFORMATION.
Your new boat has been designed to provide you
with years of enjoyment and satisfaction. In order to
maintain the factory new appearance of your boat,
we recommend the use of 3M™ Marine's one
step Maintenance and Reconditioning Products
designed specifi cally for pleasure boats. Follow-
ing proper fi berglass maintenance guidelines will
help maintain your boat's performance, value, and
enjoyment.
Gelcoat surfaces are slippery when wet.
Always wear nonslip footwear securely fastened to
your feet and hold on to rails or the boat structure.
! WARNING
Waxed surfaces are slippery.
Do not wax areas that are usually walked on.
! WARNING
1. P
AINT
C
LEANING
A
GENTS AND
O
THER
S
UBSTANCES
Do not use products containing chlorine, phos-
phates, perfumes and nondegradable ingredients.
Consult your marine dealer regarding environmen-
tal regulations before painting the hull. Fumes can
last for hours, and chemical ingredients can harm
people, property and the environment. Common
household cleaning agents may cause hazardous
reactions. Read and understand directions on all
paint, cleaning and polishing materials before us-
ing.
EXPLOSION/FIRE HAZARD
Care and refi nishing materials may contain ingre-
dients that are fl ammable or explosive. Do not use
such materials in the bilge
Shut off electrical power and ventilate when using
such materials anywhere on the boat or in the cabin.
Do not create sparks or use lighted materials.
! WARNING
A. K
EEP
B
ILGE
A
REA
D
RY
Water may accumulate in the engine room where
it is not able to drain to the bilge pump. Check all
areas of the engine room for accumulated water and
dry thoroughly. Water left standing may penetrate
through the gelcoated surfaces and wick into the
fi berglass affecting the life of the product.