Page 28 - Appendix C: UK Statutory Requirements
SPOT 3 User's Guide
Available facilities
The SPOT is manufactured in the UK by SDX Business
Systems Limited and has been approved for the use of the
following facilities:
1. Modem rates supported are: V.21/22/22bis, only
asynchronous transmission modes apply.
2. Group 3, class 2 facsimile to 9600 bps.
3. An internal loudspeaker to allow audio monitoring of
call progress.
4. Auto-calling and auto-answering.
5. Detection of secondary proceed indication.
6. Automatic dialling using loop disconnect dialling and
MF tone dialling.
7. Simple telephony
Any other usage will invalidate the approval of the
apparatus if as a result, it then ceases to conform to the
standards against which it was approved. SPOT is only
approved for use with compatible PBX's, including those
which return secondary proceed indication.
It cannot be guaranteed that the apparatus will operate
correctly under all possible conditions of connection to
compatible PBX's. If you experience any difficulties, please
contact you SPOT telephone support centre
(see the back
cover for details)
.
Stored numbers
It is important that the internal number store is correctly
programmed since any error could cause the modem to
redial an incorrect number and hence cause irritation to
other network users.
Содержание SPOT 3
Страница 1: ...SPOT 3 User s Guide By SDX Business Systems Limited 38GDE00001SCA Issue 2...
Страница 2: ......
Страница 4: ......