SDX Audio SPOT 3, Руководство пользователя

Страница: 19 / 36

Working with PC Applications - Page 15
SPOT 3 User's Guide
Windows Terminal
To run Terminal:
Click on the Terminal icon,
this is normally found in the
Accessories group.
Microsoft supply Terminal as part of Microsoft Windows
3.1/3.11. It is a program to you to pass commands, text
messages and files to other modems. You can use it to
connect your PC to another PC with a modem.
For full
details refer to your Windows User Guide.
Terminal Setup
Terminal supports multiple setups, which you can save as
files and then load when required. The setup may vary
according to the service being accessed at the other end.
To setup Terminal for SPOT:
1. Start
Terminal
and then select
Setting
and
Communications
.
2. Set the
Baud rate
to
2400
.
3. Set
Data bits
to
8
,
Stop bits
to
1
and
Parity
to none.
4. Set the
Flow control
to
Hardware
.
5. Leave
Parity Check
and
Carrier Detect
off (no
X
).
6. Set the
Connecter
to the port to which your SPOT is
connected.
7. Click on
OK
after making all the changes necessary.
8. Click on
File
and then
Save
as. Enter a suitable file name
(eg.
spot.trm
) and click on
OK
.