SDX Audio SPOT 3, Руководство пользователя

Страница: 23 / 36

Appendix A: SPOT Commands - Page 19
SPOT 3 User's Guide
S-Register Values
S-Registers are used to store values that control SPOT's
modem operation. The AT command
Sn?
displays the
contents of S-register
n
, while the command
Sn=x
sets the
S-register
n
to value
x
.
Note:
To comply with BABT regulatory requirements the S-
registers should not be set outside the limits shown below.
Setting the value of any register outside the shown limits
will invalidate the approval of the SPOT.
SPOT S-Register Values
Limits Units Default Description
S0 0-6 rings 0 Automatic answer control
S1 0-255 rings 0 Ring counter
S2 0-255 ASCII 43 Escape code character
S3 0-127 ASCII 13 Carriage return character
S4 0-127 ASCII 10 Line feed character
S5 0-255 ASCII 8 Backspace character
S6 4-8 seconds 4 Dial tone wait time
S7 1-50 seconds 30 Carrier wait time
S8 4-8 seconds 4 Dial pause character (,) time
S9 1-255 1/10th sec. 6 Carrier detect time
S10 1-255 1/10th sec. 7 Carrier loss delay
S12 0-255 1/50th sec. 40 Escape sequence guard time
S14 – – – Modem setup flags
S18 0-255 seconds 0 Self test time
S25 0-255 1/100th sec. 5 DTR hang up delay
S26 0-255 1/100th sec. 1 RTS to CTS delay