SDX Audio SPOT 3, Руководство пользователя

Страница: 27 / 36

Appendix A: SPOT Commands - Page 23
SPOT 3 User's Guide
Sending Telephony Commands to SPOT
The
ATI7=
command allows decimal numbers, indicating
different telephony events, to be passed to the SPOT
terminal. SPOT responds
OK
after each command.
SPOT Telephony Command Values
Keypad settings Time break (hook flash) Set-up Key Events
1 Dial DTMF from keypad 47 Dial time break recall 70 Set-up key invalid digit code
2 Dial LD from keypad 112 Dialling complete 71 Set-up key timeout expired
3 Stop TEL-MODEM comms 120 Reset Test Mode 72 LD keypad dialling set-up
4 Restart TEL-MODEM comms 125 Always muted 73 DTMF keypad dialling set-up
5 Enable Auto-Dial Keypad 126 Reset telephony completely 74 Headset mode set-up
6 Disable Auto-Dial Keypad 119 Reset telephony 75 Handset/handsfree mode set-up
7 Interrogate software version no.
DTMF dialling
76 Bell off set-up
Line interface control
48 Dial DTMF 0 77 Bell on set-up
16 Release line interface 49 Dial DTMF 1
Line mute
17 Seize line in handset mode 50 Dial DTMF 2 80 Unmute line interface
18 Seize line in handsfree mode 51 Dial DTMF 3 81 Mute line interface
24 Initiate voice mode 52 Dial DTMF 4
Phone mode
25 Modem loop applied 43 Dial DTMF 5 82 Put SPOT in headset mode
26 No Modem Loop Applied 54 Dial DTMF 6 83 Put SPOT in handsfree/handset
mode
27 Dial LND store 55 Dial DTMF 7
Ringer volume
28 Setup 56 Dial DTMF 8 96 Ringer volume 1
LD dialling
57 Dial DTMF 9 97 Ringer volume 2
31 Dialling pause 58 Dial DTMF A 98 Ringer volume 3
33 Dial LD 1 59 Dial DTMF B 99 Ringer volume 4
34 Dial LD 2 60 Dial DTMF C
Handsfree speaker volume
35 Dial LD 3 61 Dial DTMF D 103 Rotate volume levels
36 Dial LD 4 62
Dial DTMF
∗
104 Speaker volume 0
37 Dial LD 5 63 Dial DTMF # 105 Speaker volume 1
38 Dial LD 6
Ringer Control
106 Speaker volume 2
39 Dial LD 7 64 Ringer disable 107 Speaker volume 3
40 Dial LD 8 65 Ringer enable 108 Speaker volume 4
41 Dial LD 9 109 Speaker volume 5
42 Dial LD 0 110 Speaker volume 6