SDX Audio SPOT 3, Руководство пользователя

Страница: 11 / 36

Installing SPOT - Page 7
SPOT 3 User's Guide
Connecting SPOT to Your PC
To operate SPOT under PC control, it needs to connect to
one of your computer's serial ports. These ports are also
called COM ports (from communication) ports. They are
normally 9 or 25-pin D-type sockets. Refer to the PC
manufacturers instructions to identify the correct ports.
To connect SPOT to the PC:
1. First follow the instructions in " Connecting SPOT to a
Telephone Socket" on page 6.
2. Plug the SPOT power supply unit into a suitable mains
supply socket and switch on.
3. Plug the power supply cable into the socket under the
SPOT phone.
4. Locate a free serial port on your PC
(refer to your PC
manufacturers information)
. If it is not a 9-pin serial port,
you need a 9-pin to 25-pin serial adapter.
5. Connect the SPOT serial cable to the serial port
(use the
9-pin to 25-pin serial adapter if necessary)
.
6. Hand-tighten the securing screws on the serial cable
plug (and adapter if used).
7. Go to "Installing the SPOT Software " on page 8.