Operation & Maintenance Manual
──
LG918 Wheel Loader
60
Lift is used for lifting.
Neutral is used for maintaining the
bucket in the desired position.
Lower is used for lowering.
Float is used for moving freely
under applied force.
(2) Working device control handle
Refer to
1.1 General View of Controls and Gauges Figure 3-2
in this chapter.
This handle controls the bucket and lift. There are four gears to control the lift, neutral, lower and
float of the lift arm pro-and post, and there are three gears to control the forward tilt, neutral and rear
tilt of the bucket from left to right.
Lift Arm Control Handle
Put the control handle from front to back to control the
lower, float, neutral and lift of the lift arm.
Lift is used for lifting.
Neutral is used for maintaining the lift arm in the desired
position.
Lower is used for lowering.
Float is used for moving freely under applied force.
Notice: Never put the lift arm down when it is in the floating position.
Bucket Control Handle
Move the control handle from left to right to control the front tilt, neutral and rear tilt of the
bucket.
Rear Tilt is used for drawing in the bucket
Neutral is used for keeping the bucket in the desired position.
Forward Tilt is used for dumping.
Lifting limit location function: When place the control handle in the lifting position, the
electromagnetic force from lifting limit location locked magnet coil of pilot valve can lock the
Position of Bucket
Control Lever
Position of Lift Arm
Control Lever
