Operation & Maintenance Manual
──
LG918 Wheel Loader
56
This switch, locating on the steering column on the right low side of
steering wheel, is used for starting or shutting down the electric system
and the engine.
HEAT Position
This position is used for the engine pre-heating position of cold-start
system. The domestic basic type is not mounted with pre-heat system, the
user can select to install.
OFF Position
Insert or remove the key in this position. Turn the key to this position to cut off the electric
power.
ON Position
This position is used to turn on the electric system. Keep the key in this position when the engine
is running.
START Position
This is the engine-start position. Keep the key at this position during starting. After the engine
has started, immediately pull out the key, or it will return to ON position automatically.
z
Turning Switch
Push this switch forward, and the left turning lamp lights. Push this switch backward, and the
right turning lamp lights. Refer to 1.1 Control System and the Gauge Figure 3-1 in this chapter,
z
Switch Group (if assembled)
Refer to 1.1 Control System and the Gauge Figure 3-2
in this chapter. The switch controls lighting, high and
low beam and steering light.
Lighting
When the starting switch is in the ON position, the
high beam of front headlight is lightened if the switch group turns to OFF and put it up; the head
lamp, tail light and back light is lightened if the switch group turns to the position of ‘
’ or
‘
’.
Control of high and low light
When the starting switch is in the ON position, the low beam of front headlight is lightened if the
switch group turns to the position of‘
’. The high beam of front headlight is lightened when the
switch is put down.
Control of turning lamp
The left turning lamp is lightened when the switch is put forward, and the right turning lamp is
