Operation & Maintenance Manual
──
LG918 Wheel Loader
22
z
Do not drive, turn or brake suddenly and do not
detour.
z
Never suddenly stop or lower the working
equipment, which may throw out the materials from
the bucket or cause the loader to turn over.
5.4 Drive at Proper Speeds
z
Know the characteristics of the loader, and follow the actual conditions in the working area.
Drive at the proper speed. Select path of drive and method of machining to let the others know.
z
Keep a low speed so as to maintain control easily at all times.
z
Never drive fast, turn to brake suddenly on rugged, slippery or oblique ground.
z
Slow down when passing over rough or rugged ground with blocks around, which may cause
some problems in controlling the steering wheel. Loader may turn over if operated in the wrong
way.
z
Let the engine run smoothly; never drive at high speed.
5.5 Ensure Good Visibility
z
Slow the speed and sound the horn if necessary to let others know, and determine the proper
direction when the visibility is bad or at a narrow crossing.
z
Sand, dust, fog or storm may affect the visibility. Slow down when visibility is poor. When
visibility is not good, stop working until the weather cleans.
z
The loader is a special vehicle. Drive carefully when taking long parts which may block the
visibility. Carefully lift, go forward and backward, and shift gears. Never let unauthorized people
go into the working area or give specific directions.
z
There may be some illusion about the height of the
ground and the distance at night, so keep the light on
and drive at proper speed.
z
Keep the front and rear head light and working light
on when working in dark areas.
5.6 Pay Attention to Blockages
z
If there are blockages (roof of buildings or the door frame), keep the loader away from the
blockages when turning or passing.
