Mounting Instructions for KP-41U
The 3x4 keypad is designed to mount to a single gang switchbox or on a wall, pedestal or
any flat surface of at least 3 ½” by 5 ¼”. The composition of the mounting surface will
determine the fastening method required. If mounting to a surface other than a switchbox:
1. Select a flat surface (3 ½” by 5 ¼”) near the door where you wish to install the keypad.
2. Drill the large hole for the Keypad connector using a 1” (25mm) drill bit.
3. Place the connector on the back of the keypad in the large hole. Mark the keypad
mounting holes.
4. Drill clearance holes in accordance with fastening method used. (If mounting to wood,
drill small pilot holes and use #6 flat head wood screws provided. If mounting to metal,
drill two
5
/
32
" clearance holes for #6 flat head machine screws provided.)
5. Do NOT mount the keypad at this time.
6. Proceed to Install the Wiring Cable.
P:\INSTALLATION INST\Access Control\INST-936.vsd 0106 Page 6
Mounting Instructions KP-31U and KP-31Y
The 2x6 keypad is designed for mullion mount applications. It can also be mounted on a wall,
pedestal or any flat surface of at least 1 ¾” by 7”. The composition of the mounting surface will
determine the fastening method required:
1. Select a flat surface (1 ¾ ” by 7”) near the door where you wish to install the keypad.
2. Using the template, mark location of holes.
3. Drill the large hole using a 1” (25mm) drill bit.
4. Place the connector on the back of the keypad in the large hole to verify that the mounting
holes are aligned. Make adjustments if necessary.
5. Drill mounting holes in accordance with fastening method used. If mounting to wood, drill
small pilot holes and use #6 flat head wood screws provided. If mounting to metal, drill
two
5
/
32
" clearance holes for #6 flat head machine screws provided.
6. Do NOT mount the keypad at this time.
7. Proceed to Install the Wiring Cable.
PREPARE THE KEYPAD FOR INSTALLATION
There are different procedures for mounting each Keypad. Identify the Keypad part number
and follow the appropriate mounting instructions below.
