SCS Sentinel CL-3645, Руководство пользователя

Страница: 151 / 170

EN
EN ::: 58
Checking the Video Signal
The Indoor phone will show the video on the screen. The icons at the top of the screen tell you what’s
going on with the camera and Indoor phone.
The table below shows the different status icons and what they mean. Since the icons appear based on
the state of the camera and Indoor phone, you won’t see all of these icons at the same time.
Icon
What it Means
The signal from the camera is from low to strong.
There is no signal from the camera.
The video currently on the LCD comes from the
camera1#, 2#, 3#, 4#.
1 2 3 4
18 58
Paging
Dial Mode
To stop paging, press the key on the base again
or any key on the handset.
You can page the handset from the base unit
making it ring with a special tone. It's useful to
locate a lost handset.
Press the key on the base unit (less than 5
seconds), all the handsets registered to the
base will ring for about 60 seconds.
You can select to change the dial mode by the
following steps:
1. Press the soft key.
2. Press repeatedly to choose
, and press the soft key.
3. Press the to choose , then
press the soft key.
Menu
BS
Settings Select
Dial Mode
Select
or key
key
4. You can press to select the required
dial mode options ( / ) and press the
soft key. A confirm beep will be heard.
Tone Pulse
Select
or key
Note
:
If you are not sure which dialing mode should
be selected, please contact your local service
provider.
Note
:
On a long key press, more than or equal to
5 seconds, the base will enter subscription
mode. For details, see page 36.