SCP SCIENCE NOVAWAVE Скачать руководство пользователя страница 39

Страница: 39 / 46

Version 0.15.1

sCP sCIenCe

warrants this product free from defects in workmanship and materials for one (1) year from date of purchase.

1. Should the unit malfunction, please contact

sCP sCIenCe

’s Service Department or your local distributor for further instructions.

2. There are no user-serviceable parts in this unit. The warranty is void if the instrument shows evidence of tampering or is subjected to
excessive moisture, heat, corrosion or other misuse.

sCP sCIenCe

shall not be responsible for any damage or losses, however caused, which may be experienced as a result of the

improper installation or misuse of this product.

4. Products are supplied for laboratory use only and should not be used for any household, medical or therapeutic application.

sCP

sCIenCe

presumes that only trained and qualified individuals, familiar with procedures suitable for the safe operation of these

instruments, will handle them. Our customers are solely responsible for the safe operation, handling and use of these products.

A minimum of safety considerations must be followed when working with

NOVA

WAVE

microwave digestion system in order to maintain good

laboratory practice:

•

Do not place the

NOVA

WAVE

on a surface containing flammable material.

•

NOVA

WAVE

requires a clearance of 3 inches (7.5 cm) on all sides.

•

NOVA

WAVE

should be vented into a fume hood with the exhaust hose provided.

•

NOVA

WAVE

system must be plugged into a three-prong grounded outlet (receptacle provided).

•

Always wear safety glasses when handling samples.

•

Never use quartz vessels if they appear cracked or damaged.

•

Never tamper with the calibration settings of the safety caps. These have been pre-calibrated to appropriate settings in the factory.

•

Use 2 or 3 people to lift the system.

Warranty & Safety Information

Содержание NOVAWAVE















































Результаты поиска

Содержание NOVAWAVE

Отзывы:

Похожие инструкции для NOVAWAVE

Бренды по названию

Популярные бренды

SCP SCIENCE NOVAWAVE, Руководство пользователя

Результаты поиска

Содержание NOVAWAVE

Отзывы:

Похожие инструкции для NOVAWAVE

Бренды по названию

Популярные бренды