Pocket Camera
SG570-6M
2
Cautions
2 Cautions
★
The working voltage of the camera is 6V. It is supplied by four AA
batteries.Please install batteries according to shown polarity.
★
Please unlock the write-protect before inserting the SD-card.
★
Please insert the SD-card when the power switch is at
OFF
position
before testing the camera. The camera has no internal memory for
saving images or videos. If no SD-card is inserted, the camera will
shut down automatically after a continuous indication sound.
★
Please do not insert or take out the SD-card when the power switch is
at
ON
position.
★
It is recommended to format the SD-card by the camera when used
at the first time.
★
The camera will be in USB mode when connected to a USB port of a
computer. In this case, the SD-card functions as a removable disk.
★
In the
TEST
mode(insert the control into the USB interface then
switch the camera at
ON
position), the camera will shut down
automatically after 3 minutes if no operation is done. Please turn on
the power again if you want to continue to work with the control.
★
Please ensure sufficient power when having firmware upgrade,
otherwise the upgrade process could be interrupted incorrectly. If
any fault occurs after improper upgrading process, the camera may
stop function properly.
Page
4
