Pocket Camera
SG570-6M
3 Quick Introductions
3 Easy
Operations
3.1
Power Supply
To supply power for the camera, four AA size batteries are needed.
Open the bottom cover. Confirm that the power switch is at the
OFF
position. Install the fully charged batteries into the depot according the
polarities sign shown below. The following batteries with 1.5V output
can be used:
1.
High-density and high-performance alkaline batteries
(Recommended)
2.
Rechargeable alkaline batteries
3.
Rechargeable NiMH batteries
There are two battery slots.
When in low-battery state, camera will be automatically shut down
after two indication sounds. Please change the batteries in time.
3.2
Insert the SD-card
Open the bottom cover. Insert SD-card into the card slot with
unmarked side upwards. Please note that the SD-card can only be
plugged in one direction. Make sure that the write-protect switch of the
SD-card is on the “write” position otherwise the camera cannot be
switch on.
Page
5
