Pocket Camera
SG570-6M
3 Quick Introductions
3.3
Power on and Entering into the ON Mode
Before switching on, please pay attention to the follows:
1.
Avoid temperature and motion disturbances in front of the
camera such as big leaf, curtain, air-conditioner, air outlet of the
chimney and other heat sources to prevent from false triggering.
2.
The height from ground for placing the camera should vary with
the object size appropriately. In general,
one
to
two meters
are
preferred.
Slide the power switch to the
ON
position to power on the camera
and enter into the
ON
mode
.
After switching on the camera, the motion indication LED (red) will
blink for about 10s. The 10s is a buffering time before autonomic
capturing photos or videos, e.g. for closing and locking the bottom
cover, fixing the camera on a tree and walk away.
In
TEST
mode, it requires to connect the control then to do further
customizing settings, when the user complete the settings, it requires to
unplug the control to enter into normal use, that is,
if the wired
control still be connected with the camera, the camera will
not work.
The camera (the control must be unplugged when in
ON
mode) will take pictures or videos automatically according to the
default settings or preset customer settings.
3.4
Enter into the TEST Mode
Connect the wired control, then switch to the
ON
position and enter
into the
TEST
mode. There are some functions in
TEST
mode:
Customer settings, manual capture and preview. The control is needed
Page
6
