Setting the seating system (for qualified specialists)
Figure 4.8
29
4.3
Legrest settings
Lower leg length (fig 4.6).
1. Loosen the set screw (1).
2. Slide the footplate in the desired
position (2).
3. Tighten the bolt.
Make sure that there is sufficient free
space under the footplates to operate
the wheelchair over obstacles.
Angle of the footplate (fig 4.7)
1. Loosen the bolt (1).
2. Set the footplate in the desired
angle (2).
3. Tighten the bolt.
Legrests width setting (fig 4.4)
See chapter 4.2
Angle of the leg rest (fig 4.8)
4. Loosen the bolts (1).
5. Set the leg rest in the desired
angle (2).
6. Tighten the bolts.
Figure 4.6
Figure 4.7