Setting the seating system (for qualified specialists)
Figure 4.5
28
4.2
Seat width setting
Seat width setting by armrests (fig
4.3).
1. Loosen the set screw (1).
2. Slide the armrest in the desired
position.
3. Tighten the set screw.
Figure 4.3
Seat width setting by legrests (fig 4.4).
1. Loosen the bolt (1) but do not
remove. Tap the bolt inside to
“unclamp”the blocks.
2. Slide the legrest socket (2) in the
desired position.
3. Tighten the bolt (1).
Figure 4.4
Backrest angle setting
See figure 4.5
1. Loosen the bolt (1) of the angle
adjuster.
2. Set the desired angle of the
backrest (2).
3. Place back and tighten the bolt.