Scotty eyesite550, Руководство пользователя

Страница: 83 / 118

77
Advanced Options
Using the Data Ports
The eyesite 550 system is equipped with two auxilary data ports labeled ‘RS-232’ and
‘RS-422/485’ The data ports are configured in the Data Port Options menu.
Data ports can be used for data transmissions in a variety of applications ranging from
pan/tilt/zoom (PTZ) cameras, PC-to-PC data transfer, external third party peripheral
control, or for telemetry data transmission during a video call.
Notes :
1. The serial connection does not interfere with the normal operation of the eyesite
550.
2. If you wish to transfer data the remote unit must also be set up for data transfer. The
same settings must be used on both ends. This rule does not apply to using the built
in drivers to control a local or remote Pan, Tilt, Zoom camera.
Additional Information
Additional information about using the data ports can be found in Technical Notes on
the SCOTTY website, http://www.scottygroup.com. Refer to the “Support” section
for the latest information, including:
• Using and setting up the Data Ports
Configuring the Data Ports
To configure the Data ports:
1.
Press the MENU button, then press the number 6 key.