Scotty eyesite550, Руководство пользователя

Страница: 40 / 118

36
Note: Remote access must be enabled in the Setup menu on the remote eyesite 550
before this feature can be used. You do not need a Supervisor PIN.
Setting up Video Sequencing
You can automatically sequence through your video sources while in a call if you set
sequencing
ON in the Camera Video Setup menu. If sequencing is OFF , only the
default video source is displayed during a call.
To set up video sequencing:
Press the MENU key on the remote control, then press the number 3 key to display
the Camera Video Setup menu.
Press the number 3 or number 4 key for:
5.
Press ENTER twice to save your changes.
Sequencer Mode Use the Right or Left arrow keys to select ON , OFF or
SENTRY .
Select OFF to turn the sequencer off.
Select ON to turn the sequencer on. During a call the eyesite
550 scrolls through the saved presets.
Select SENTRY to sequence through video sources both
during a call and when not in a call.
Sequencer Speed Sets the speed at which the sequence moves between presets.
You can set the speed in 3 second increments between 6 and
60 seconds (6, 9, 12, 15, 18, etc.). Use the left and right arrow
keys to scroll through the options until the speed you require
is displayede.