Scotty eyesite550, Руководство пользователя

Страница: 73 / 118

67
Connecting Other Equipment
2.
Press the number 6 key on the remote control to access the Data Port Options
menu.
If the camera is connected to Data Port 1:
1.
Press the number 1 , or the arrow Up key to highlight the Data Port 1 option.
2.
Use the Right or Left arrow keys to select EXT CAM1 .
3.
Press the ENTER button once.
4.
Press the number 2 , and select Protocol which has become visible, and select
the appropriate driver.
5.
Press the ENTER button twice to save changes.
Switching Between Video Sources
When you have multiple cameras connected to your eyesite 550, the far end can switch
between these video sources and select the video they want to view during the call.
To allow far end source selection during a call:
1.
Press the MENU button on your remote video system to access the Setup
Menu.
2.
Press the number 3 key to access the Camera Video Setup menu, then press the
number 3 key to highlight the Remote Access field. Set Remote Access to ON .
3.
Press the ENTER button twice to save changes.
To switch between video sources during a call:
1.
Press
FAR
for far end control or
NEAR
for near end control.
2.
Press a number key, 1 - 6 depending on the video source you wish to view.
Setting Camera Video Presets
Up to 9 camera presets can be configured in the cameras connected to the eyesite 550.
This enables you to select various camera positions from any of the video sources.
For instance, if the unit is used for videoconferencing, a PTZ camera may be set as the
default.
A preset configuration is a combination of a specific camera and its settings. Video
presets are set in the Camera Video Setup menu. See Setting Video Presets on the next
page.