background image

 

Limited Warranty

                                                                                                                                 

Scorpio-branded security products come with a 2-year (from time of purchase) limited 
warranty.  This includes all components and accessories that are manufactured by 
Aritronix Ltd. The following sections describe the limited warranties.

                                           

What is covered by this limited warranty?

                                                                                       

This limited warranty covers defects in materials and workmanship in your — our end-user 
customer's — Scorpio-branded hardware products, including Scorpio-branded 
accessory products. 

                                                                                                                          

What is not covered by this limited warranty?

                                                                                

This limited warranty does not cover cosmetic damage, damage/failure due to acts of 
God: Problems that result from:

                                                      

 

External causes such as accident, abuse, misuse, or problems with electrical power.

 

 

Usage that is not in accordance with product instructions or modifications of the 
product.

 

 

Failure to follow the product instructions. 

 

Problems caused by using accessories, parts, or components not manufactured or 
approved by Scorpio. 

What should you do if you experience a problem with a Scorpio product?

                               

First contact Aritronix, Ltd. using one of the methods listed below. [Proof of purchase, 
installer and motorcycle information will be requested].  If after assistance from our 
trained staff it is determined that the Scorpio product may be faulty then you will provide 
with detailed information on processing a warranty claim.  All warranty claims must 
contain a return authorization number (RA#).  Aritronix, Ltd. will not accept any package 
that does not have been approved for warranty repair/exchange. 

 

 

 

 

 

 

 

 

 

 

 

 

 

FCC Notice 

This device complies with Part 15 of FCC rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) This device must 
accept any interference that may cause undesired operation. 
 
Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate this device. 

 

 
 
 
 
 
 
 
 

For technical assistance with any of the procedures on this manual, or for warranty claims 
please contact Aritronix at: 

www.scorpioalarms.com

 

[email protected]

 

Toll Free 

(800)428-0440 

International 

 (480)951-1109 

 

Aritronix Ltd 

16055 N. Dial Blvd. B-10 

Scottsdale, AZ 85260

 
 
 
 
 
 

 
 
 
 

 

Содержание SR-i500SW

















Отзывы: