Motorcycle Battery Status
When the voltage on the motorcycle battery drops below 11.2 volts The LCD displays icon.
Locking the Transceiver’s buttons
To “lock”, press button #4 for 2 sec. The Transceiver will beep and buttons will lock.
To “unlock”, press button #4 for 2 sec. The Transceiver will beep and buttons will unlock.
Checking Motorcycle Status and Violation Display with Time Stamp
1.
Press button #4. The back light and the memory screen will be displayed. If the alarm
was not triggered, all the sensor icons will come on and the # 0 0 will be displayed.
2.
If there was an alarm trigger, the last triggered sensor will flash. Press button #4
repeatedly to scroll through all the triggered sensors in the Transceiver’s memory.
3.
The alternating numeric display shows the current trigger, numbering of triggers in
memory, and the time the trigger occurred. For Example:
[03 05] + [8:55] means the
tilt sensor was triggered. It was the 3
rd
sensor violated out of a total of 5 alarm triggers
and the event occurred at 8:55am.
4.
Press button #3 to exit.
5.
To clear memory, press and hold down button #3 for 2 seconds.
If the system was trigged, the last triggered
sensor will be displayed
If no alarm triggers in memory, all
sensor icons will be displayed
Press button
4 once
Time of trigger
Trigger # Total # of triggers
Press button 4 repeatedly to
scroll though the trigger memory
Pres button 3 to exit and clear.
Or, press and hold button 3 for 2
seconds to erase memory.
8
