8
as you need
⑥
Connect IR Emitter to the IR OUT ports of SC38.MX16 or the HDBaseT Receivers
as you need.
⑦
Connect the control device (e.g. Control System, PC) to the RS232 port of either the
SC38.MX16 or far-end HDBaseT Receivers. RS232 signal can be transmitted bi-
directionally between SC38.MX16 and far-end HDBaseT Receivers.
⑧
Connect the control device (e.g. PC) to the TCP/IP port for GUI control.
⑨
Connect an AC 100V~240V power outlet and the SC38.MX16 with the AC power
cord.
NOTE:
§
Connect HDBT ports of
SC38.MX16
and far-end receiver with straight-through
cable.
§
IR Receivers connected to IR IN should be with carrier. If not, send
command %0900. or %0901.to enter following mode or force mode in the IR matrix
launched between SC38.MX16 and far-end receivers.
§
The SC38.MX16 boasts 14 HDBaseT output ports supported PoC. The
corresponding HDBaseT Receiver don’t need to connect power adaptor when the
SC38.MX16 is connected to 100V~240V power outlet via the included power cord.
SC38.MX16
Scion Tech
User Manual
Tel: +44 (0) 1635 862484
www.scion-tech.co.uk
