32| 8.0 LinLab - Motorized Device Configuration and Control
Software
8.3.12 View / Show Stored Points
Show Stored Points allows the user to drive to positions, store the
coordinates of those positions, edit the name of the positions, grade
them, if required and then return to the positions.
In order to store a point within LinLab, drive the manipulator or
microscope stage to the required location and select AddPoint from the
stored points form.
This will cause the following screen to be displayed. The name of the
stored point automatically defaults to the coordinates of the point. If you
wish to edit the name of the stored point highlight the point information
and type the required name. If you wish to grade the point then select
the required grade.
