4.0 Operation Guide
|15
4.0 Operation Guide
|15
4.2.3 Using a Joystick
Figure F: Joystick control device
Move the joystick in the direction of travel required.
Moving the joystick to the left or right will move the MMTP left or right in
the axis.
Moving the joystick to the front or back will move the MMTP forwards or
backwards in the Y axis.
Note: Speed varies according to the amount of deflection
applied to the joystick.
Turbo – Pressing the button on the top of the joystick enables high
speed movement. When released movement will revert to fine control.
Memory – Pressing the Memory button will store the current position of
the MMTP to memory. Moving the MMTP and pressing Memory again
will store another position.
Step – Pressing the Step button will move the MMTP to the first stored
position in memory. If more than one position is stored subsequent
presses of the MR button will recall each position stored in the same
sequence they were saved.
Home In & home out –
These buttons allow two positions to be stored in memory, the Home In
position and the Home Out position. The Home Out position must be
set first before Home In can be used.
