Scientific Atlanta Continuum DVP eXtra Dense QAM Array 24, Руководство по настройке

Страница: 70 / 104

Chapter 5 Viewing Alarm Messages
Alarm/Reference/Detail Description
Alarm: Qam Card <X>:
Calibration
Ref: Calibration file error
Detail: (see description)
The calibration data on the QAM card in question became corrupt. A
Scientific Atlanta representative should be contacted.
<X> represents the card number. The detail will indicate the I2c error
that has been detected.
Alarm: Qam Card <X>:
Oven <Y>
Ref: Oven Temperature
Detail: - - - - The temperature of the modulator stabilization circuit is out of
specification. The board should be left for at least 1 minute to see if the
error clears. If after 1 minute the alarm still persists then the card
should be removed and re-inserted again. If this action does not clear
the alarm then a Scientific Atlanta representative should be contacted.
This alarm clears when the communication is established with the
device.
<X> represents the QAM card position and <Y> the RF Output
number.
Alarm: Rear Panel Fan <X>
Ref: Fan malfunction
Detail: Rear panel fan <X>
failed The indicated fan has stopped working. Check the fans. When the
fans are working again the alarm clears.
<X> represents the fan number.
56 4018055 Rev B