In decoding state, this page displays "set NDI decoder volume", and "decoder volume" adjusts the volume of
decoding output to display device, such as output to TV, etc.
The decoder settings need to be changed in decoding mode. Please refer to page 12 for switching mode.
9. Decoder settings
9.1 Set NDI decoder volume
The frame rate of the video format conversion of both sender and receiver should be integer or
decimal! Otherwise, the transmission fails. For example, if the transmitting end converts
2160p60, the receiving end must select 2160p50, 1080p50, and 1080p23.98. Similarly, if the send-
ing end is a decimal, the receiving end must also be in decimal format.
16