If it is in the encoding state, users can choose to set the logo background image as the image stream accord-
ing to the actual needs. Click the image to add a local file,and then click Save to start the stream pushing. If
not, click end stream pushing.
Program and preview are both started, and software with tally (such as vmix) is used to decode the signal
source and broadcast theprogram. Tally lights up the red light, while pre monitoring lights up the green light.
If the green light is on when pre monitoring is not needed, close preview and click apply; If you don't need tally
function, you can turn it all off (note that if you turn off program, the green light will not be on when the pre
monitor is turned on). The tally function is turned on by default.
Call switch: Click "Open" to call the supporting broadcast guide software Laudo. Click "Close" to Close the
call function.
Push stream background image displayed in NDI Studio monitor
8.7 Logo background image upload streaming
8.8 Set up Tally lights
8.9 Intercom switch
14